{"title":"601 Series End Mills","description":"\u003cdiv class=\"collection-description\"\u003e\n\u003ch2\u003e601 Series End Mills\u003c\/h2\u003e\n\u003cp\u003eShop 601 Series End Mills with product data organized for fast, confident tool selection. Review diameter, length, shank, geometry and pack configuration on each product page before ordering.\u003c\/p\u003e\n\u003ch3\u003eSelection guide\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrands represented: Champion.\u003c\/li\u003e\n\u003cli\u003eCommon material matches: Steel.\u003c\/li\u003e\n\u003cli\u003eTypical applications: Milling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm the workpiece material, required dimensions and machine or holder compatibility before use. Apply the correct cutting fluid where recommended and follow the manufacturer’s speed, feed and safety guidance.\u003c\/p\u003e\n\u003cp\u003eContinue browsing \u003ca href=\"\/collections\/type-end-mills\"\u003eEnd Mills\u003c\/a\u003e or \u003ca href=\"\/collections\/type-industrial-cutting-tools\"\u003eMilling, Deburring \u0026amp; Metal Cutting Tools\u003c\/a\u003e for related sizes, styles and accessories.\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"champion-601-1-8x3-8-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-1\/8X3\/8 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-1\/8X3\/8 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-1\/8X3\/8\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e1\/8 in x 3\/8 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-1\/8X3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e1\/8 in x 3\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787478380644,"sku":"CHA-601-1\/8X3\/8","price":27.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-3-16x3-8-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-3\/16X3\/8 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-3\/16X3\/8 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-3\/16X3\/8\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e3\/16 in x 3\/8 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-3\/16X3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e3\/16 in x 3\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787478478948,"sku":"CHA-601-3\/16X3\/8","price":27.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-1-4x3-8-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-1\/4X3\/8 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-1\/4X3\/8 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-1\/4X3\/8\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e1\/4 in x 3\/8 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-1\/4X3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e1\/4 in x 3\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787479724132,"sku":"CHA-601-1\/4X3\/8","price":27.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-5-16x3-8-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-5\/16X3\/8 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-5\/16X3\/8 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-5\/16X3\/8\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e5\/16 in x 3\/8 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-5\/16X3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e5\/16 in x 3\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787479756900,"sku":"CHA-601-5\/16X3\/8","price":27.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-3-8x3-8-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-3\/8X3\/8 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-3\/8X3\/8 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-3\/8X3\/8\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e3\/8 in x 3\/8 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-3\/8X3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e3\/8 in x 3\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787479855204,"sku":"CHA-601-3\/8X3\/8","price":27.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-7-16x3-8-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-7\/16X3\/8 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-7\/16X3\/8 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-7\/16X3\/8\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e7\/16 in x 3\/8 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-7\/16X3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e7\/16 in x 3\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787479953508,"sku":"CHA-601-7\/16X3\/8","price":36.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-1-2x3-8-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-1\/2X3\/8 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-1\/2X3\/8 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-1\/2X3\/8\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e1\/2 in x 3\/8 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-1\/2X3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e1\/2 in x 3\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787480019044,"sku":"CHA-601-1\/2X3\/8","price":36.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-1-2x1-2-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-1\/2X1\/2 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-1\/2X1\/2 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-1\/2X1\/2\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e1\/2 in x 1\/2 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-1\/2X1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e1\/2 in x 1\/2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787480051812,"sku":"CHA-601-1\/2X1\/2","price":37.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-9-16x1-2-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-9\/16X1\/2 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-9\/16X1\/2 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-9\/16X1\/2\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e9\/16 in x 1\/2 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-9\/16X1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e9\/16 in x 1\/2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787480248420,"sku":"CHA-601-9\/16X1\/2","price":49.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-5-8x1-2-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-5\/8X1\/2 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-5\/8X1\/2 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-5\/8X1\/2\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e5\/8 in x 1\/2 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-5\/8X1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e5\/8 in x 1\/2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787480379492,"sku":"CHA-601-5\/8X1\/2","price":54.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-5-8x5-8-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-5\/8X5\/8 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-5\/8X5\/8 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-5\/8X5\/8\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e5\/8 in x 5\/8 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-5\/8X5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e5\/8 in x 5\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787480412260,"sku":"CHA-601-5\/8X5\/8","price":59.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-11-16x1-2-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-11\/16X1\/2 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-11\/16X1\/2 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-11\/16X1\/2\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e11\/16 in x 1\/2 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-11\/16X1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e11\/16 in x 1\/2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787481198692,"sku":"CHA-601-11\/16X1\/2","price":63.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-11-16x5-8-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-11\/16X5\/8 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-11\/16X5\/8 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-11\/16X5\/8\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e11\/16 in x 5\/8 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-11\/16X5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e11\/16 in x 5\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787481296996,"sku":"CHA-601-11\/16X5\/8","price":63.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-3-4x1-2-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-3\/4X1\/2 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-3\/4X1\/2 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-3\/4X1\/2\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e3\/4 in x 1\/2 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-3\/4X1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e3\/4 in x 1\/2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787481362532,"sku":"CHA-601-3\/4X1\/2","price":64.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-3-4x5-8-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-3\/4X5\/8 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-3\/4X5\/8 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-3\/4X5\/8\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e3\/4 in x 5\/8 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-3\/4X5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e3\/4 in x 5\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787481428068,"sku":"CHA-601-3\/4X5\/8","price":65.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-3-4x3-4-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-3\/4X3\/4 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-3\/4X3\/4 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-3\/4X3\/4\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e3\/4 in x 3\/4 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-3\/4X3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e3\/4 in x 3\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787481493604,"sku":"CHA-601-3\/4X3\/4","price":66.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-13-16x5-8-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-13\/16X5\/8 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-13\/16X5\/8 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-13\/16X5\/8\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e13\/16 in x 5\/8 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-13\/16X5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e13\/16 in x 5\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787481559140,"sku":"CHA-601-13\/16X5\/8","price":81.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-13-16x3-4-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-13\/16X3\/4 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-13\/16X3\/4 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-13\/16X3\/4\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e13\/16 in x 3\/4 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-13\/16X3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e13\/16 in x 3\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787481624676,"sku":"CHA-601-13\/16X3\/4","price":95.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-7-8x5-8-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-7\/8X5\/8 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-7\/8X5\/8 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-7\/8X5\/8\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e7\/8 in x 5\/8 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-7\/8X5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e7\/8 in x 5\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787481690212,"sku":"CHA-601-7\/8X5\/8","price":84.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-7-8x3-4-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-7\/8X3\/4 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-7\/8X3\/4 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-7\/8X3\/4\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e7\/8 in x 3\/4 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-7\/8X3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e7\/8 in x 3\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787481755748,"sku":"CHA-601-7\/8X3\/4","price":84.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-7-8x7-8-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-7\/8X7\/8 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-7\/8X7\/8 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-7\/8X7\/8\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e7\/8 in x 7\/8 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-7\/8X7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e7\/8 in x 7\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787481821284,"sku":"CHA-601-7\/8X7\/8","price":84.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-1x5-8-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-1X5\/8 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-1X5\/8 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-1X5\/8\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e1 in x 5\/8 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-1X5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e1 in x 5\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787481919588,"sku":"CHA-601-1X5\/8","price":97.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-1x3-4-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-1X3\/4 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-1X3\/4 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-1X3\/4\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e1 in x 3\/4 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-1X3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e1 in x 3\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787481985124,"sku":"CHA-601-1X3\/4","price":97.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-1x7-8-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-1X7\/8 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-1X7\/8 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-1X7\/8\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e1 in x 7\/8 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-1X7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e1 in x 7\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787482050660,"sku":"CHA-601-1X7\/8","price":97.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-1x1-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-1X1 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-1X1 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-1X1\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e1 in x 1 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-1X1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e1 in x 1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787482116196,"sku":"CHA-601-1X1","price":101.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-1-1-8x7-8-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-1-1\/8X7\/8 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-1-1\/8X7\/8 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-1-1\/8X7\/8\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e1-1\/8 in x 7\/8 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-1-1\/8X7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e1-1\/8 in x 7\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787482181732,"sku":"CHA-601-1-1\/8X7\/8","price":145.77,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-1-1-8x1-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-1-1\/8X1 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-1-1\/8X1 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-1-1\/8X1\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e1-1\/8 in x 1 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-1-1\/8X1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e1-1\/8 in x 1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787482214500,"sku":"CHA-601-1-1\/8X1","price":146.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-1-1-4x7-8-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-1-1\/4X7\/8 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-1-1\/4X7\/8 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-1-1\/4X7\/8\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e1-1\/4 in x 7\/8 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-1-1\/4X7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e1-1\/4 in x 7\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787482280036,"sku":"CHA-601-1-1\/4X7\/8","price":146.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-1-1-4x1-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-1-1\/4X1 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-1-1\/4X1 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-1-1\/4X1\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e1-1\/4 in x 1 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-1-1\/4X1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e1-1\/4 in x 1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787482378340,"sku":"CHA-601-1-1\/4X1","price":153.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-1-1-4x1-1-4-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-1-1\/4X1-1\/4 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-1-1\/4X1-1\/4 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-1-1\/4X1-1\/4\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e1-1\/4 in x 1-1\/4 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-1-1\/4X1-1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e1-1\/4 in x 1-1\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787482443876,"sku":"CHA-601-1-1\/4X1-1\/4","price":172.33,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-1-3-8x1-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-1-3\/8X1 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-1-3\/8X1 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-1-3\/8X1\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e1-3\/8 in x 1 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-1-3\/8X1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e1-3\/8 in x 1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787482476644,"sku":"CHA-601-1-3\/8X1","price":180.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-1-1-2x1-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-1-1\/2X1 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-1-1\/2X1 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-1-1\/2X1\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e1-1\/2 in x 1 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-1-1\/2X1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e1-1\/2 in x 1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787482542180,"sku":"CHA-601-1-1\/2X1","price":196.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-1-1-2x1-1-4-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-1-1\/2X1-1\/4 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-1-1\/2X1-1\/4 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-1-1\/2X1-1\/4\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e1-1\/2 in x 1-1\/4 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-1-1\/2X1-1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e1-1\/2 in x 1-1\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787482640484,"sku":"CHA-601-1-1\/2X1-1\/4","price":208.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-1-3-4x1-1-4-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-1-3\/4X1-1\/4 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-1-3\/4X1-1\/4 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-1-3\/4X1-1\/4\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e1-3\/4 in x 1-1\/4 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-1-3\/4X1-1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e1-3\/4 in x 1-1\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787482771556,"sku":"CHA-601-1-3\/4X1-1\/4","price":238.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"},{"product_id":"champion-601-2x1-1-4-multi-flute-hss-non-center-cutting-end-mill","title":"Champion 601-2X1-1\/4 Multi-Flute HSS Non-Center-Cutting End Mill","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eChampion 601-2X1-1\/4 Multi-Flute HSS Non-Center-Cutting End Mill\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e601-2X1-1\/4\u003c\/strong\u003e is a Champion multi-flute hss non-center-cutting end mill in \u003cstrong\u003e2 in x 1-1\/4 in\u003c\/strong\u003e. This standalone product is listed by exact MPN and size so you can select the correct end mill for your milling setup.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-flute geometry provides a smooth cutting action and supports finishing work.\u003c\/li\u003e\n\u003cli\u003eSingle-end design is intended for profiling, slots and pockets where plunge cutting is not required.\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel delivers a practical combination of toughness and value.\u003c\/li\u003e\n\u003cli\u003eRight-hand helix helps move chips away from the cutting zone.\u003c\/li\u003e\n\u003cli\u003eSuitable for copper alloys, cast iron, alloy steels and tool steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfiling\u003c\/li\u003e\n\u003cli\u003eSlotting\u003c\/li\u003e\n\u003cli\u003ePocketing\u003c\/li\u003e\n\u003cli\u003eFinishing\u003c\/li\u003e\n\u003cli\u003eCopper alloys\u003c\/li\u003e\n\u003cli\u003eCast iron\u003c\/li\u003e\n\u003cli\u003eAlloy steels\u003c\/li\u003e\n\u003cli\u003eTool steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable class=\"spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e601-2X1-1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eChampion Multi-Flute HSS Non-Center-Cutting End Mills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting size\u003c\/th\u003e\n\u003ctd\u003e2 in x 1-1\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlute and end style\u003c\/th\u003e\n\u003ctd\u003eMulti-Flute HSS Non-Center-Cutting End Mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHelix\u003c\/th\u003e\n\u003ctd\u003eRight-hand helix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary materials and uses\u003c\/th\u003e\n\u003ctd\u003eProfiling; Slotting; Pocketing; Finishing; Copper alloys; Cast iron; Alloy steels; Tool steels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage quantity\u003c\/th\u003e\n\u003ctd\u003e1 end mill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eUse this non-center-cutting end mill for side milling, profiling and open-ended slot work. Start from a pre-drilled or open entry when required, and select speeds, feeds, coolant and stepovers for the material.\u003c\/p\u003e\n\u003cp class=\"compliance\"\u003e\u003csmall\u003eThis tool is non-center-cutting and is not intended for direct plunge cutting. Use guarding, eye protection and appropriate machine-tool practices. California Proposition 65 warning may apply.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Champion Cutting Tool","offers":[{"title":"Default Title","offer_id":48787482804324,"sku":"CHA-601-2X1-1\/4","price":275.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/3121\/0340\/files\/601-FLAT.jpg?v=1784400045"}],"url":"https:\/\/www.cuttingtoolsoutlet.com\/collections\/type-end-mills-series-601.oembed","provider":"Cutting Tools Outlet","version":"1.0","type":"link"}