Champion CS200 HSS annular cutter 2-inch depth cutting large diameter hole in steel plate

Set of CS200 HSS annular cutters showing diameters from 7/16″ to 2″ with pilot pins

CS200 HSS annular cutter ¾″ Weldon shank ready for mag-drill structural steel job

Close-up of CS200 annular cutter with pilot pin mounted in magnetic drill arbor

Roll over image to zoom in Click on image to zoom

Bright Finish 2" Depth HSS Annular Cutters
Diameter: 7/16"

Champion Cutting ToolSKU: CHA-CS200-7/16 UPC: 846035056236

Diameter: 7/16"

Variant

45 .31CAD$

Click here to request for bulk pricing

40 in stock ready to ship

Eastern CA QC · ON · ATL

EstimatedAs soon as tomorrow

Western CA BC · AB · SK

Estimated2–3 days

Northern Territories YT · NT · NU

Estimated4–6 days

United States may vary By state

Estimated 3–5 days

Transit times are estimates and may vary by carrier and destination.

Have any questions? Click here

Structural steel, mild steel, stainless.
Steel plate, I-beams, H-beams, angle, pipe, tube.
Annular cutting up to 2″ depth of cut.
Use in magnetic drill systems with ¾″ Weldon shank arbors and pilot pin.
Fabrication shops, bridgework, construction installs, field maintenance.
Pair with cutting fluid/wax (e.g., BruteLube) to extend tool life and manage heat.

Champion CS200 HSS Annular Cutters w/ Pilot Pin — 2″ Depth of Cut for Structural Steel

The CS200 series high-speed-steel annular cutters are designed to drill clean, large-diameter holes in steel plate, structural beams, pipe and tube with high productivity. With a depth of cut up to 2″ and a pilot pin included for accurate centering, coolant delivery and automatic slug ejection, these cutters are built for mag-drill systems and heavy use. Compatible with ¾″ Weldon shank arbors and many mag-drill setups.

Key Advantages

Up to 2″ depth of cut—drill larger holes than standard HSS cutters.
Pilot pin included for accurate start, slug ejection, improved chip clearing and faster cycle times.
¾″ Weldon (2-flat) shank ensures compatibility with standard magnetic drill arbors and quick change systems.
Use with cutting fluid or wax (eg. BruteLube) for extended tool life, lower heat build-up and better finish.
Designed for structural fabrication, pipe and tube penetration, large diameter holes in steel and alloys.

Technical Specifications

Material	High Speed Steel (HSS)
Depth of Cut	2″ (≈ 50.8 mm)
Shank Size	¾″ Weldon (2-flat)
Pilot Pin	Included
Diameter Range	7/16″ to 2″ available sizes
Applications	Structural steel, beams and plates, pipe/tube, metal fabrication, mag-drill systems

Always wear appropriate PPE. Secure magnetic base and follow machine and cutter manufacturer instructions for safe operation.

Champion CS200-SET HSS Annular Cutter Set — 5 PC Bright Finish with Pilot Pin & 2″ Depth

The CS200-SET is a premium HSS annular cutter set designed for heavy-duty drilling in structural steel, plates, pipe and tube. This five-piece set includes cutters in sizes 9/16″, 11/16″, 13/16″, 15/16″ and 1-1/16″, each with a pilot pin for enhanced accuracy, coolant feed control and slug ejection. Built with a 2″ depth of cut, ¾″ Weldon shank compatibility and sharp tooth geometry for high productivity and clean holes.

Why It Wins

Set of five key sizes for steel fabrication: 9/16″, 11/16″, 13/16″, 15/16″, 1-1/16″.
2″ depth of cut in all sizes—drill deeper holes than standard HSS cutters.
Pilot pin included with each cutter for accurate centering, improved coolant flow and automatic slug ejection.
¾″ Weldon (2-flat) shank ensures broad compatibility with many mag-drill arbors and systems.
Bright finish HSS for high productivity, improved wear resistance and clean hole finish.
Optimised for mag-drill use in fabrication shop, maintenance, on-site steel work.

Technical Specifications

Set Sizes	9/16″, 11/16″, 13/16″, 15/96″, 1-1/16″ (5 pieces)
Depth of Cut	2″ (≈ 50.8 mm)
Shank Compatibility	¾″ Weldon (2-flat)
Pilot Pin	Included with each cutter
Material	High Speed Steel (HSS)
Recommended Use	Structural steel, plate, pipe/tube, mag-drill applications

Always wear appropriate PPE. Secure the magnetic base and follow machine and cutter manufacturer instructions for safe operation.

Pilot pin included - Premium HSS Annular cutter

Bright Finish 2" Depth HSS Annular Cutters | Pilot pin for 7/16" cutters

$8.78

Qty

Bright Finish 2" Depth HSS Annular Cutters | Pilot pin for 1/2" to 2" cutters

$8.78

Qty

Champion BruteLube XLUB-WAX cutting wax stick for metal drilling

BruteLube Cutting Wax | 2 oz

Option

$12.42

Qty

BruteLube XLUB metal cutting fluid bottle from Champion Cutting Tool

BruteLube Cutting Fluid | 4 oz

Option

$6.41

Qty

Champion CS200-SET HSS annular cutter set with 2 inch cutting depth for magnetic drills

5 Piece Bright Finish 2" Depth HSS Annular Cutter Set

Contains: CS200-9/16, 11/16, 13/16, 15/16 & 1-1/16 w/ pilot pin

$295.89

Qty

Buying in bulk pays off.

We are always happy to offer volume pricing for bulk orders.

Request for volume pricing

Order Processing

Fast & Easy Order Process

From the moment you place an order to the moment it hits your job site, every step is controlled for speed and reliability.

1

Step 1

Order Received Instantly

Your order is validated in real time and pushed straight to our system with no manual handling.

2

Step 2

Order Confirmation

You receive a clean confirmation with all details so you can forward it internally without editing anything.

3

Step 3

Picking & Packing

Our team prepares your order with the right tooling, quantities and brands, optimized for safe transport.

4

Step 4

Tracking Number Provided

As soon as the shipping label is created, your tracking information is sent so you can plan your jobs.

5

Step 5

Fast delivery to your door

Your order shows up where you need it, when you need it.

Bright Finish 2" Depth HSS Annular Cutters
Diameter: 7/16"

Materials & Applications

Description