Cutting Tools Outlet Guides

Choosing reamers for industrial materials starts with the workpiece, the machine and the required hole, thread, cut or finish. This guide explains what to compare before ordering professional tooling.

Choosing reamers for steel starts with the workpiece, the machine and the required hole, thread, cut or finish. This guide explains what to compare before ordering professional tooling.

The best reamers choice for hole finishing balances performance, compatibility and total job cost. Use this practical checklist to move from the application to the right product configuration.

A reamer removes a small amount of material to improve hole size, roundness and finish after drilling.

Reamer size follows the desired finished hole, allowance and tolerance.

Reamer chatter usually comes from instability, too much overhang, poor alignment or incorrect cutting conditions.

An oversize reamed hole can come from excessive allowance, runout, poor alignment, speed or a worn reamer.

Accurate reaming depends on allowance, alignment, reamer quality and machine stability.