Why a Floor Scraper Leaves Material Behind
The wrong shank, worn edge, shallow angle or unsuitable hammer setting can reduce scraping performance.
Floor Scrapers: selection checklist
- Confirm the scraper and hammer compatibility.
- Choose the correct blade width and edge.
- Adjust angle and setting while controlling debris.
How to choose the right option
- Stop and inspect the tool, workpiece and machine interface.
- Correct the size, geometry, setup or cutting condition involved.
- Run a controlled test and inspect the result before returning to production.
Shop the recommended collections
- Floor Scrapers for Concrete & Flooring
- Putty Knives & Scrapers for Professional Work
- Champion Cutting Tools
- Cutting Tools for Industrial Materials Tools for Cutting Fluids, Waxes &…
- Masonry & Concrete Tools Tools for Concrete & Masonry Tools
- Industrial Machining Cutting Tools
Products to compare
- Champion CM99-01 2.0 mm Legacy Floor Scraper Blade & Hardware Kit
- Champion CM99-02-M12 2.0 mm Floor Scraper Replacement Blade
- Champion CM99-03-M12 18-Piece Floor Scraper Repair Hardware Kit
- Champion CM99-15 16" Spline Floor Scraper with Blade
- Champion CM99-19 16" SDS-Max Floor Scraper with Blade
- Champion CM99-20 6" x 25" SDS-Max Floor Scraper
- Champion CM99-25 1.5 mm SDS-Max Floor Scraper Replacement Blade
- Champion CM99-30 10-Piece SDS-Max Floor Scraper Repair Kit
Continue learning
- Floor Scrapers for Concrete & Flooring
- Industrial Material Cutting Tools
- Concrete & Masonry Tools
- Industrial Machining Tools
For production quantities, unusual sizes or help selecting the correct tool, request a quote from Cutting Tools Outlet.