Why an SDS Bit Will Not Lock
Locking problems are often caused by contamination, worn grooves, the wrong shank or a damaged chuck.
Concrete & Masonry Tools: selection checklist
- Clean the shank and chuck.
- Confirm SDS-Plus or SDS-Max compatibility.
- Inspect the locking mechanism before use.
How to choose the right option
- Stop and inspect the tool, workpiece and machine interface.
- Correct the size, geometry, setup or cutting condition involved.
- Run a controlled test and inspect the result before returning to production.
Shop the recommended collections
- Rebar Cutters for Concrete & Masonry
- Drill & Screwdriver Bits for Professional Work
- Champion Cutting Tools
- Masonry & Concrete Tools Tools for Concrete & Masonry Tools
- Concrete & Masonry Tools 3
Products to compare
- Champion CM79-1 1" x 12" 1/2 inch Straight-Shank Rotary Rebar Cutter for Reinforced Concrete
- Champion CM79-1-1/2 1-1/2" x 12" 1/2 inch Straight-Shank Rotary Rebar Cutter for Reinforced Concrete
- Champion CM79-1-1/4 1-1/4" x 12" 1/2 inch Straight-Shank Rotary Rebar Cutter for Reinforced Concrete
- Champion CM79-1-1/8 1-1/8" x 12" 1/2 inch Straight-Shank Rotary Rebar Cutter for Reinforced Concrete
- Champion CM79-1-3/8 1-3/8" x 12" 1/2 inch Straight-Shank Rotary Rebar Cutter for Reinforced Concrete
- Champion CM79-1/2 1/2" x 12" 1/2 inch Straight-Shank Rotary Rebar Cutter for Reinforced Concrete
- Champion CM79-3/4 3/4" x 12" 1/2 inch Straight-Shank Rotary Rebar Cutter for Reinforced Concrete
- Champion CM79-5/8 5/8" x 12" 1/2 inch Straight-Shank Rotary Rebar Cutter for Reinforced Concrete
Continue learning
For production quantities, unusual sizes or help selecting the correct tool, request a quote from Cutting Tools Outlet.