Why an Annular Cutter Slips in the Arbor
Slipping can be caused by the wrong shank, loose set screws, contamination or a worn arbor.
Annular Cutters: selection checklist
- Clean the shank and arbor.
- Confirm the cutter interface and tighten correctly.
- Inspect set screws and arbor wear.
How to choose the right option
- Stop and inspect the tool, workpiece and machine interface.
- Correct the size, geometry, setup or cutting condition involved.
- Run a controlled test and inspect the result before returning to production.
Shop the recommended collections
- Annular Cutters & Mag Drill Bits
- Hole Saws for Metal
- Champion Cutting Tools
- Carbide Cutting Tools Tools for Concrete & Masonry Tools
- Masonry & Concrete Tools Tools for Concrete & Masonry Tools
- Magnetic Drill Press Tools
Products to compare
- 1-3/8" Depth Carbide Tipped Stack Annular Cutters
- 10 Piece Electrical 1" Depth Carbide Tipped Hole Cutter Set
- 10 Piece Electrical 3/16" Depth Carbide Tipped Hole Cutter Set
- 12 Piece Mechanical 1" Depth Carbide Tipped Hole Cutter Set
- 12 Piece Plumbing 1" Depth Carbide Tipped Hole Cutter Set
- 2" Depth Carbide Tipped Stack Annular Cutters
- 3 Piece 1-3/8" Depth Carbide Tipped Annular Cutter Set
- 3 Piece Electrical 3/16" Depth Carbide Tipped Hole Cutter Set
Continue learning
- Annular Cutters for Magnetic Drills
- Carbide Cutting Tools
- Concrete & Masonry Tools
- Magnetic Drill Tools
For production quantities, unusual sizes or help selecting the correct tool, request a quote from Cutting Tools Outlet.